Description
IndyM8/4 8" 1x4Ohm SVC 200WRMS Quality High SPL Wide Range Driver Optimised For Custom Installations
KEY FACTS
| Product Category | Midbass & Midrange Speakers |
| Version | 1 |
| Series | Indy |
| Date Added | 15/02/2021 |
| Date Modified | 01/09/2021 |
| Barcode | 680044778594 |
| Production Status | Current |
| Product Net Weight (g) (For Pairs/Sets Weight Is All Major Parts) | 2125 |
| Product Height (mm) | 84 |
| Product Length (mm) | 208 |
| Product Width (mm) | 208 |
| Complete Product Pack Weight (g) | 2625 |
| Retail Carton L (mm) | 228 |
| Retail Carton W (mm) | 228 |
| Retail Carton H (mm) | 104 |
| Operating Temperature (Degrees Celsius) | 0-50 |
| Warranty (Months) | 12 |
| Sold As | Single |
SPEAKER DATA
| Continuous RMS Power (Watts) (One Speaker, Using Appropriate Crossover & 0%THD) | 200 |
| Overall Diameter (mm) | 208 |
| Magnet Diameter (mm) (Including Magnet Protector Where Applicable) | 120 |
| Installation Cut-out Diameter (mm) | 186 |
| Overall Depth (mm) | 85 |
| Mounting Depth (mm) | 78 |
| Front Protrusion From Mounting Plane (mm) | 6 |
| System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) | 100-12,000 |
| Impedance (Ohm) (Nominal) | 4 |
| Sensitivity (db/1Wm) | 94.38 |
| Total Magnet Weight (Oz) | 25.7 |
| Magnet Size (mm) | 120*15 |
| Magnet Type | Y30 |
| Magnet Qty | 1 |
| Top Plate thickness (mm) | 5 |
| Back Plate thickness (mm) | 6 |
| Recommended Cable | 16AWG/OFC |
| Voice Coil Former Spec | Kapton |
| Voice Coil Type | CCA Round Wire |
| Voice Coil Diameter (mm) | 40 |
| Voice Coil Internal Diameter (mm) | 38.5 |
| Voice Coil External Diameter (mm) | 40 |
| Voice Coil Winding Hight (mm) | 7 |
| Voice Coil Winding (Layers) | 2 |
| Cone Type | Pressed Paper |
| Spider Compliance | Medium |
| Spider Type | Linear |
| Spider Diameter (mm) | 120 |
| Spider Design | Single |
| Surround | Dual Roll |
| Surround Material | Cloth |
| Tinsel Wire | Single |
| Terminal | Push |
Indy M concept was designed to offer an all-round high performance midrange device at a reasonable price point. The new engineering team drew up a wish list of specification points and made several prototypes before settling on the current basket, motor and cone layouts. From there detail changes were made to almost every aspect of the basic design focussing on each detail. Performance was optimised to allow the driver to run well in almost any application. The Indy M branding was originally conceived in mid-2019, with outline specifications in place by the end of that year. Prototypes were built throughout 2020 and first production models were made available Q3 2021
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.